Get Started
190-02327-03 Rev. C Pilot’s Guide 2-21
Managing Paired Devices
To enable automatic connection between the unit and a paired device at power up,
tap Auto Reconnect.
AUTO RECONNECT
Enables automatic connection between the unit and the paired device when the two
are within range.
REMOVE
Removing a device from the list means it is no longer paired with the unit. This action
requires pilot confirmation.
Be sure to remove pairing on both devices before attempting to pair them again
.
CONNECTION STATUS
Importing a Flight Plan
To view the flight plan, acknowledge the advisory and tap Preview.
It may be necessary to turn this function off if a portable device application
makes repeated erroneous attempts to send flight plans to the unit.
To view a list of all paired devices and their
connection status, tap Manage Paired Devices.
The device is configured and communicating properly.
The device is not available and is not configured or it is not
communicating properly.
Allow automatic import of flight plans via Bluetooth
wireless technology.
Once the transfer is complete, an advisory message informs
that a new flight plan is available for preview.
To Next Page
Loading...
Need help?
General
