Garmin Pilot for iOS User’s Guide
190-01501-00 Rev. F
42
Plan
OverviewPlanFileFlySubscriptionsAppendicesIndex
Or:
Enter Lat/Lon information in one of the following formats:
Lat/Lon Lat/Lon
####N/#####W
N##.#/W##.#
N####/W#####
##.#/-##.#
####/-#####
##.#N/0##.#W
##.#N/##.#W
##.#/-0##.#
N##.#/W0##.#
Spaces are not allowed, slash (/) is required. Any Latitude format can be
combined with any longitude format in the same string.
Lat/Lon Formats
Or:
Enter Radial/Distance waypoint in one of the following formats:
Radial/Distance Descriptions
MSP/190/035 or MSP/190/35
Identifier/Radial/Distance
MSP190035
IdentifierRadialDistance
Spaces are not allowed, when slashes (/) are used the leading zero can be left
off the radial and/or distance.
Radial/Distance Formats
Or:
1)
Touch
Add Waypoint Button.
2)
Use the keyboard to input the waypoint identifier.
3)
Touch the
Add Waypoint Button to add additional waypoints.
Or:
1)
Use one of the above methods to enter a departure point.
2)
In the Map View area long-press any location or flight plan leg, to display
the rubber-band, drag the rubber-band to the desired map location.
3)
Once the rubber-band is on or near the desired location release the rubber-
band. A list of nearby waypoints is displayed.
4)
Select the desired waypoint from the list. Or create a User Waypoint.
5)
Repeat steps 2-4 to add additional waypoints.
To Next Page
Loading...
Need help?
General
