Garmin Pilot for iOS User’s Guide
190-01501-00 Rev. F
59
Plan
Overview Plan File Fly Subscriptions Appendices Index
Or:
1)
Touch .
2)
Enter the Required Aircraft Information by touching each field and using the
keyboard.
3)
Enter optional performance data.
NOTE:
Performance data is used to create Navlog and to calculate trip
parameters.
4)
Touch .
5)
Touch the desired Aircraft from the list.
Enter type of Flight Plan:
Touch the Type Button and select IFR or VFR from the drop down menu.
Enter Date, ETD, Altitude, and Airspeed:
Touch the applicable field and enter the desired value(s). The Airspeed will
be populated with the Cruise TAS (kts) entered for the aircraft.
Enter Souls Onboard (SOB):
Touch the Souls on Board (SOB) field to enter the number of occupants.
Enter Fuel:
Touch the Fuel field to enter the number of hours:minutes of fuel onboard.
The Fuel field is automatically populated with the Default Fuel/Cruise Burn
Rate, but should be adjusted to reflect the actual fuel onboard the aircraft.
Enter Optional Data (SIC, Call Sign, Alternate and Remarks):
Touch the applicable field and enter the desired information.
TRIP SUMMARY
The Summary tab displays the following information: Total Distance, Cruise True
Airspeed, Total Time En Route, Direct Magnetic Course, Average True Airspeed, Average
Groundspeed, Total Fuel Burned, Departing time, and Estimated Time of Arrival. Values
are based on currently reported weather conditions and the user provided aircraft
performance data.
To Next Page
Loading...
Need help?
General
