Controlling a VIRB Action Camera During an Activity
Before you can use the VIRB remote function, you must enable the remote setting on your VIRB camera. See the
VIRB Series Owner's Manual for more information.
1 Turn on your VIRB camera.
2 Pair your VIRB camera with your tactix watch (Pairing Your Wireless Sensors, page108).
When the camera is paired, a VIRB data screen is automatically added to activities.
3 During an activity, press UP or DOWN to view the VIRB data screen.
4 If necessary, wait while your watch connects to your camera.
5 Hold MENU.
6 Select VIRB.
7 Select an option:
• To control the camera using the activity timer, select Settings > Recording Mode > Timer Start/Stop.
NOTE: Video recording automatically starts and stops when you start and stop an activity.
• To control the camera using the menu options, select Settings > Recording Mode > Manual.
• To manually record video, select Start Recording.
The video counter appears on the tactix screen.
• To take a photo while recording video, press DOWN.
• To manually stop recording video, press STOP.
• To take multiple photos in burst mode, select Take Burst.
• To send the camera to sleep mode, select Sleep Camera.
• To wake the camera from sleep mode, select Wake Camera.
Device Information
Specifications
Battery type Rechargeable, built-in lithium-ion battery
tactix Delta battery life Up to 21 days in smartwatch mode
Water rating 10ATM
1
Operating and storage temperature range From -20º to 45ºC (from -4º to 113ºF)
USB charging temperature range From 0º to 45ºC (from 32º to 113ºF)
Solar charging temperature range From 0 to 60°C (from 32 to 140°F)
Wireless frequencies 2.4 GHz @ 18 dBm maximum
1
The device withstands pressure equivalent to a depth of 100m. For more information, go to www.garmin.com/waterrating.
Device Information 113
To Next Page
Loading...
Need help?
General
Weight and Dimensions
