Restarting Your Watch
1 Hold LIGHT until the watch turns off.
2 Hold LIGHT to turn on the watch.
Resetting All Default Settings
Before you reset all default settings, you should sync the watch with the Garmin Connect app to upload your
activity data.
You can reset all of the watch settings to the factory default values.
1 From the watch face, hold MENU.
2 Select System > Reset.
3 Select an option:
• To reset all of the watch settings to the factory default values and save all user-entered information and
activity history, select Reset Default Settings.
• To delete all activities from the history, select Delete All Activities.
• To reset all distance and time totals, select Reset Totals.
• To reset all of the watch settings to the factory default values and delete all user-entered information and
activity history, select Delete Data and Reset Settings.
NOTE: If you have set up a GarminPay wallet, this option deletes the wallet from your watch. If you have
music stored on your watch, this option deletes your stored music.
Acquiring Satellite Signals
The device may need a clear view of the sky to acquire satellite signals. The time and date are set automatically
based on the GPS position.
TIP: For more information about GPS, go to garmin.com/aboutGPS.
1 Go outdoors to an open area.
The watch should be oriented with 6 o'clock pointing toward the sky.
2 Wait while the device locates satellites.
It may take 30 to 60 seconds to locate satellite signals.
Improving GPS Satellite Reception
• Frequently sync the watch to your Garmin account:
◦ Connect your watch to a computer using the USB cable and the Garmin Express application.
◦ Sync your watch to the Garmin Connect app using your Bluetooth enabled phone.
◦ Connect your watch to your Garmin account using a Wi‑Fi wireless network.
While connected to your Garmin account, the watch downloads several days of satellite data, allowing it to
quickly locate satellite signals.
• Take your watch outside to an open area away from tall buildings and trees.
• Remain stationary for a few minutes.
The temperature reading is not accurate
Your body temperature affects the temperature reading for the internal temperature sensor. To get the most
accurate temperature reading, you should remove the watch from your wrist and wait 20 to 30 minutes.
You can also use an optional tempe external temperature sensor to view accurate ambient temperature
readings while wearing the watch.
Troubleshooting 117
To Next Page
Loading...
Need help?
General
Weight and Dimensions
