Viewing Track Points
1 During an expedition, press UP or DOWN to view the map page.
2 Press START.
3 Select View Points.
4 Select a track point from the list.
5 Select an option:
• To start navigating to the track point, select Go To.
• To view detailed information about the track point, select Details.
Applied Ballistics
®
WARNING
The Applied Ballistics feature is intended to provide accurate elevation and windage solutions based on gun and
bullet profiles and measurements of current conditions only. Depending on your environment, conditions may
change rapidly. Changes in environmental conditions, like wind gusts or downrange winds, may have an effect
on the accuracy of your shot. Elevation and windage solutions are suggestions only based upon your input into
the feature. Take readings often and carefully, and allow the readings to stabilize after significant changes in
environmental conditions. Always allow a margin of safety for changing conditions and reading errors.
Always understand your target and what lies beyond your target before taking a shot. Failure to account for your
shooting environment could cause property damage, injury, or death.
NOTE: This feature is available only on the tactix Delta Solar with Ballistics device.
The Applied Ballistics feature offers customized aiming solutions for long-range shooting based on your rifle
characteristics, bullet caliber, and various environmental conditions. You can enter parameters including wind,
temperature, humidity, range, and firing direction.
This feature provides the information you need to fire long-range projectiles, including elevation holdover,
windage, velocity, and time of flight. It also includes custom drag models for your bullet type. Go to
appliedballisticsllc.com for more details about this feature. See the Applied Ballistics Glossary of Terms,
page30 for descriptions of the terms and data fields.
Applied Ballistics Options
From the watch face, press START, select Applied Ballistics, and press START.
Quick Edit: Allows you to quickly edit the range, direction of fire, and wind information (Quickly Editing Shooting
Conditions, page27).
Range Card: Allows you to view data for various ranges based on user input parameters. You can change
fields (Customizing the Range Card Fields, page27), edit the range increment (Editing the Range Increment,
page27), and set the base range (Setting the Base Range, page27).
Target Card: Allows you to view range, elevation, and windage for ten targets based on user input parameters.
You can edit the target name and values (Editing the Target Card, page28).
Environment: Allows you to customize atmospheric conditions for your current environment. You can enter
custom values, use the pressure and latitude values from the internal sensor in the device, or use the
temperature value from a connected tempe
™
sensor (Environment, page27).
Target: Allows you to customize long-range shooting conditions for your current target. You can change the
selected target and customize conditions for up to ten targets (Changing the Target, page28).
Profile: Allows you to customize gun properties (Editing Gun Properties, page29), bullet properties (Editing
Bullet Properties, page29), and output units of measure for your current profile. You can change the
selected profile (Selecting a Different Profile, page28) and add additional profiles (Adding a Profile,
page28).
Change Fields: Allows you to customize the data fields on the profile data screen (Customizing the Profile Data
Screen, page28).
Setup: Allows you to select the units of measure and enable the windage and elevation solution options.
26 Applied Ballistics
®
To Next Page
Loading...
Need help?
General
Weight and Dimensions
