11
Z-Lynk Wireless Operation
Apex features a built-in Z-Lynk wireless transmitter
which can be used with Garrett MS-3 wireless
headphones and any Z-Lynk enabled devices (such as
any other headphones connected to a Z-Lynk receiver).
A Z-Lynk Wireless headphone icon (see illustration)
on the LCD indicates the current status of your wireless
connection. A steady icon indicates the detector is
paired with an operating Z-Lynk receiver that is within
range. A flashing icon indicates that the detector is
searching for a receiver. Absence of the icon indicates
that Apex’s wireless transmitter is switched off.
Pairing: To pair with a new set of headphones/
receiver, simply switch the headphone/receiver on,
hold within 2 feet (0.6 meters) of the Apex. Next, power
on Apex, press the MENU button, and continue tapping
the MENU button until the wireless icon is highlighted
(as indicated in this illustration). Press the (+) button to
pair the headphones.
Once paired, if the headphone/receiver is switched
off or moved out of range, Apex will search and attempt
to reconnect to the receiver for 5 minutes, indicated by
a flashing icon. If the connection is not reestablished
during this time, Apex will switch off its wireless
transmitter. To reconnect, simply switch the Apex off
and then on again.
To un-pair (forget) a set of headphones, simply press
the press the MENU button to select the wireless icon
and then use the (-) button to un-pair.
Use of optional wired headphones: Apex can also
be operated with any wired headphones that have a
1/8” plug. For headphones with a 1/4” plug, an optional
adaptor is available from Garrett.
Note: Packages shipped with MS-3 headphones
include a user’s guide for full details on wireless
headphone operation.
To Next Page
Loading...
Need help?
General
