CHAPTER 1-Introduction
Pinouts
DS2000-IFR Installation and Maintenance Guide
1-9
Table 1-6. Ethernet Ports - SFP
Port Signal
Tx Transmit
Rx Receive
Table 1-7. RS232 - Serial Ports S01 - S16 - RJ45
Pin Signal
1 Request To Send (RTS)
2 Data Set Ready (DSR)
3 Transmit Data (TxD)
4 Receive Data (RxD)
5 Ground (GND)
6 Data Terminal Ready (DTR)
7 Data Carrier Detect (DCD)
8 Clear To Send (CTS)
Table 1-8. W1 and W2 DDS Ports - RJ48
Pin Signal
1 Transmit Data - Ring
2 Transmit Data - Tip
3NotUsed
4NotUsed
5NotUsed
6NotUsed
7 Receive Data - Tip
8 Receive Data - Ring
RxTx
Pin 8Pin 1
Pin 8Pin 1
To Next Page
Loading...