GarrettCom DynaStar DS2000-IFR User Manual

CHAPTER 1-Introduction
Pinouts
DS2000-IFR Installation and Maintenance Guide
1-8
1.4 P INOUTS
The DS2000-IFR provides one or more of the following port types: WAN, Ethernet, Serial, and one Async
port (Port 6) used for local connections to the DS2000-IFR to access the management software. The
following paragraphs describe the types of connectors used and the Tables referenced with each connector
type detail the pinouts for each connector type. Included with the Console port table is a description of a null
modem crossover cable. If you are connecting to the Console port and using terminal emulation to access the
device a null modem cable is required.
Location/Port Name
Connection
Type
Port Type
Pinout Table
Reference
Ports E1 through E8 (as populated)
and E0
RJ45 Ethernet
Table 1-5
Ports E7 and E8 (optional SFP for 10/100 Mbps
fiber optic ports)
LC Ethernet
Table 1-6
Ports E9 and E10 (optional SFP for Gbps fiber optic
ports)
LC Ethernet
Table 1-6
S1 through S16 RJ45 Serial
Table 1-7
W1 and W2 DDS 56/65 Kbps RJ48 WAN
Table 1-8
W1 and W2 T1/E1 RJ48 WAN
Table 1-9
RS232 (DEBUG) DB15 Maintenance Port Not used
AUX1 RJ45 Maintenance Not used
S0 RJ69 Serial
Table 1-1 0
CON (console port) RJ45 Serial
Table 1-11
AUX 2 DB15 Maintenance Not used
Table1-5.EthernetPort-RJ45
Pin Signal
1 Transmit +
2 Transmit -
3 Receive +
4NotUsed
5NotUsed
6 Receive -
7NotUsed
8NotUsed
Pin 8Pin 1

GarrettCom DynaStar DS2000-IFR Specifications

General

Brand	GarrettCom
Model	DynaStar DS2000-IFR
Category	Network Router
Language	English