11 SUSPENSION SETTING
36
Guideline
Air pressure 2 bar (29 psi)
Gradual changing of the air
pressure in steps of
0.2 bar (3 psi)
Minimum air pressure 1.4 bar (20 psi)
Maximum air pressure 4 bar (58 psi)
Info
Never adjust the air pressure to a value outside the stated
range.
– Disconnect the fork airpump from the left fork leg.
When disconnecting, excess pressure will escape from the hose
– the fork leg itself does not lose any air.
The fork airpump indicator switches off automatically after
80 seconds.
– Mount the protection cap.
Info
Only mount the protection cap by hand.
Finishing work
–
Remove the motorcycle from the lift stand. ( p. 42)
11.14 Adjusting the rebound damping of the fork
Info
The hydraulic rebound damping determines the fork suspension behavior.
M01834-10
–
Turn adjuster
1
clockwise all the way.
Info
Adjuster
1
is located at the upper end of the right fork leg.
– Turn counterclockwise by the number of clicks corresponding to the
fork type.
Guideline
Rebound damping
Comfort 15 clicks
Standard 12 clicks
Sport 10 clicks
Info
Turn clockwise to increase the damping; turn counterclock-
wise to reduce damping when the shock absorber rebounds.
To Next Page
Loading...
