Gateway Computer - Closing the Case; Replacing the Front Bezel

www.gateway.com
37
Closing the case
Replacing the front bezel
To replace the front bezel:
1 Slide the tabs on the right side of the bezel into the slots
on the right side of the computer.
2 Swing the left side of the bezel in to insert the release
tabs on the left side of the bezel into the slots on the left
side of the computer.
3 Press the left side of the bezel firmly until the release
tabs snap into place.
Tabs
8512980.book Page 37 Thursday, March 6, 2008 1:30 PM