115
Gateway Mid Tower Case
www.gateway.com
Adding or replacing a hard drive
Use these instructions to add or replace hard drives.
To replace a hard drive:
1 Identify your computer case style. For more information, see “Identifying
your computer case style” on page 106.
2 Open the case by following the instructions in “Opening the case” on
page 107.
3 Disconnect the drive cables, noting their locations and orientation. (You
will reconnect the cables after you install the new drive.) See the drive
documentation for further instructions.
Power cableData ribbon
cable
To Next Page
Loading...
Need help?
General
