177
Gateway 4-bay Small Form Factor case
www.gateway.com
Adding or replacing add-in cards
An add-in card is a card used in the computer to add functionality to the system.
Use the following instructions to replace, add, or reseat an add-in card.
To replace, add, or reseat an add-in card:
1 Identify your computer case style. For more information, see “Identifying
your computer case style” on page 106.
2 Open the case by following the instructions in “Opening the case” on
page 158.
3 Disconnect any cables that are attached to the card, noting their locations
and orientation. (You will reconnect the cables after you install the new
card.) See the add-in card documentation for further instructions.
4 If there is an add-in card retention cover screw, remove the screw, then
swing the add-in card retention cover open.
To Next Page
Loading...
