187
Adding or replacing memory
www.gateway.com
3 Find the memory module banks on your system board.
4 If you are removing a DIMM from the memory module bank, gently pull
the plastic tabs away from the sides of the memory module and remove it.
- OR -
If you are adding a DIMM to an empty memory module bank, gently pull
the plastic tabs away from the sides of the memory module bank.
5 Align the notches on the new DIMM with the notches on the memory
module bank and press firmly into the bank. The tabs on the sides of the
memory module should secure the memory module automatically. When
the module is secure, you hear a click.
6 Close the case by following the instructions for your case style.
To Next Page
Loading...
