Setting up RAID
35
5 Click Disable CrossFire to disable Crossfire
and enable multiple monitor support, then
click Apply. All display devices are enabled.
6 On the tree menu to the left, click Displays
Manager.
7 Right-click the number 2 icon in the box to
the right, then click Enable.
8 Repeat Step 7 for each additional
connected monitor.
Setting up RAID
About RAID
RAID (Redundant Array of Inexpensive/
Independent Disks) lets your computer use
multiple hard drives more efficiently. Your
computer supports RAID 0, RAID 1, RAID 5, and
RAID 10.
RAID for performance
RAID 0 lets your computer see multiple hard
drives as a single drive. This type of RAID can
increase file access speeds, which is important if
you work with video editing, sound editing, and
high-performance games. RAID 0 is also an
affordable way to increase your total file storage
capacity.
8511781.book Page 35 Tuesday, October 10, 2006 4:41 PM
To Next Page
Loading...
