www.gateway.com
31
4 If your monitor has a DVI connection, connect your
monitor’s DVI cable to the longer of the two DVI cables.
- OR -
If your monitor has only a VGA connection, connect the
DVI-to-VGA adapter to the longer of the two DVI cables,
then connect your monitor’s VGA cable to the adapter.
Configuring CrossFire
CrossFire graphics cards let you divide graphics tasks between
two cards, then send the combined signals to a single monitor.
Graphics tasks can be shared in several ways, and each has
its own advantages, depending on the program you are
running and the type of monitors you have.
Help
For the latest information on setting up your CrossFire video
cards, see www.ati.com/crossfire
. For help on topics not covered here,
see the ATI Catalyst Control Center’s online help.
DVI connector
8511858.book Page 31 Monday, December 18, 2006 10:51 AM
To Next Page
Loading...
Need help?
General
