GCC Technologies i-Craft - Print and Cut Your Design

35
3.3.7 Print and Cut Your Design
The Print and Cut function allows you to print the graphics from Sure Cuts A
Lot to printer, and then put the printed materials on i-Craft
TM
cutter to cut out
the contour of printed jobs from Sure Cuts A Lot.
Step 1 Open an image file in Sure Cuts A Lot (please refer to 3.3.1-3.3.4 for
how to open your design in Sure Cuts A Lot).
Step 2 Click on the Cutter icon on the toolbar, set the parameters and click on
“Print+Cut” to add the registration marks and print out the image.