Need help?Do you have a question about the GCC Technologies LaserPro C180 and is the answer not in the manual?
General| Laser Type | CO2 |
|---|---|
| Resolution | Up to 1000 DPI |
| Drive System | DC Servo Motor |
| Memory | 32 MB |
| Engraving Area | 18" x 12" (457mm x 305mm) |
| Cutting Thickness | 1/4" (6mm) acrylic, 1/8" (3mm) wood |
| Interface | USB |
| Power Requirements | AC 110-240V, 50-60Hz |
| Software Compatibility | Windows |
Covers laser principles, safety ratings, interlock systems, measures, and warnings.
Details required warning labels, their placement, and general safety alerts.
Specifies suitable locations and conditions for machine operation to prevent malfunction.
Step-by-step guide for safely unloading and checking all included items.
Instructions for powering up the machine and connecting it to a computer.
Guides for installing graphics software and LaserPro USB/Print drivers.
Overview of the control panel, its buttons, display, and menu navigation.
Detailed guide on setting up and using the LaserPro C180 print driver for jobs.
Explains Raster Engraving, Vector Cutting, and their combined usage.
Tips for 3D effects and optimizing image settings for better quality.
Guides on cleaning and lubricating machine components for longevity.
Diagnoses and solutions for quality, non-operational, and other system issues.
Defines technical terms and industry-specific vocabulary used in the manual.
Lists detailed technical data, dimensions, and capabilities of the LaserPro C180.
To Next Page
