Keeping your LaserPro C180 clean and well maintained will ensure quality output, consistent reliability, and
extended product life. Smoke, dust or residue build-up inside the laser system or the mechanical components
can cause a reduction in the laser power, irregularities in the motion system, reduced product life cycle,
and a host of other avoidable problems. This section will cover how to perform regular maintenance on the
LaserPro C180’s worktable, motion system, mirrors, and focal lens.
The frequency of the cleaning schedule will depend on number of variables such as the types of material you
work with, the immediate work environment, the frequency of use, the quality of the exhaust system, etc.
WARNING
・ Electrical shock may occur if you do not turn off and unplug the C180 before cleaning.
・ Damage may occur to the system if you do not turn off and unplug the C180 before
cleaning.
・
Always turn off and unplug the LaserPro C180 before cleaning!
8.1 Suggested Cleaning and Maintenance Supplies
Cleaning / Maintenance Tool Special notes
Soap Solution or All-Purpose Cleaner
Paper Towels
Cotton Cloth
Denatured Alcohol
DO NOT use alcohol on any painted surface, plastic,
or the laser system!
Acetone ONLY to be used on the working table
Vacuum Cleaner with a Flexible Nozzle Only to be used in and around the worktable and
motion system
Light Grade Machine Oil
Cotton Swabs Supplied
Lens Cleaner Supplied
Lint Free Lens Tissue Supplied
# 2 Phillips Screwdriver
Allen Wrench .050”
To Next Page
Loading...
