7.5 SmartGUARD Fire Alarm Option
Laser cutting and engraving operations using the SmartGUARD device protects the operator, machine, and
the work products from potential re hazards. During the engraving process, ames may be produced when
working with combustible or easily-ammable materials, such as paper or wood. The SmartGUARD is an
optional item that can be set to notify the operator through audio warnings and automatically shutdown the
machine as a safety precaution.
INSTALLATION:
If you have purchased your system with SmartGUARD, then no installation is required, as your system will
arrive with SmartGUARD pre-installed. For system owners that did not initially purchase this option, but
would now like to add the SmartGUARD, they will need to contact your local authorized GCC distributor to
have this great feature installed.
1. Lift top cover of the C180 using the handle.
Remove the rear plate covering
the Y motor and rear panel of
the working area
To Next Page
Loading...
