GE Energy Services
68K System Monitor
User's Guide
SWM0023 1.00 2 General
3-80
Full Release
TR - Trace, Continued
Syntax (continued)
Example 1
Type tr /r 20 /t0 10 208000 = 12345678 and press ENTER.
Results: This will allocate a buffer for 20 samples and
triggers when the long memory location becomes
12345678. It saves 10 samples before the trigger, the
trigger sample and 9 samples more to fill the buffer.
Example 2
Type tr /r 20 /t0 10 208000 change and press ENTER.
Results: This triggers if the long memory location changes
value.
Example 3
Type tr /r 20 /t0 10 208000 != 12345678 and press ENTER.
Results: This triggers if long memory value changes from the
value 12345678.
Example 4
Type tr /r 20 /t1 10 00123456 and press ENTER.
Results: This triggers when the RTC value if greater than or
equal to 00123456.
Example 5
Type tr /r 20 /t2 10 30123456 and press ENTER.
Results: This triggers after the process with the ID of
30123456 runs.
Special
Considerations
This function is only available as a special debug BootROM as
there is not enough room for it to be permanently included.
Currently, the BootROM code must have the TRACE
command compiled into S043-0 before you can use this
command. You will have to remove some other commands in
order to make room for it.
To Next Page
Loading...
