GE 68K System - TR - Trace

68K System Monitor
User's Guide
GE Energy Services
General SWM0023-1.00 -2
Full Release
3-79
TR - Trace
Platform
o
CPM
o
D20
D20 Base
o
D20 ME
D20 Base
o
D20/200
CCU Base
o
D20/200 ME
CCU Base
o
D25
Description
Use this command to track the execution sequence of the processes in the system.
Syntax
Below is usage and syntax information for this command
Command Format
tr [/h | /c | /s]
tr /d [/c] [/e] [<start_time> [<end time>] ]
tr /r [/g] [<samples>] /t0 <pre_trigger> <address> <condition>
<value>
tr /r [/g] [<samples>] /t1 <pre_trigger> <trigger time>
tr /r [/g] [<samples>] /t2 <pre_trigger> <process name>
Variables
/h = display help
/c = clear all
/s = stop collection
/d = display gathered data
/c – continuous display,
/e – format for spread sheets
/r = gather data
/g = allocate buffers from global memory
Parameters
start_time = start time for trace to display.
end time = end time for trace to display.
pre_trigger = number of samples to store before the trigger
address = the watch address to trigger on
condition = Condition to watch for = != < > <= >=
change
value = value to watch for
trigger time = RTC time to trigger
process name = name of process to trigger on
Continued on next page