GE 68K System - Section 2: Monitor Commands; AL - Change Auto-Logout Timer

GE Energy Services
68K System Monitor
User's Guide
SWM0023 1.00 2 General
3-4
Full Release
Section 2: Monitor Commands
AL - Change Auto-logout Timer
Platform
o
CPM
o
D20
D20 Base
o
D20 ME
D20 Base
þ
D20/200
CCU Base
þ
D20/200 ME
CCU Base
þ
D25
Description
Use this command to change the monitor’s auto-logout timer duration from the
default of 5 minutes.
Syntax
Below is usage and syntax information for this command
Command Format
al timout (minutes)
Variables
None
Parameters
minutes = 0 to 32767 minutes. ‘0’ disables the timer.
Example
Type al 15 and press ENTER.
Results: The monitor will log out after 15 minutes of
inactivity.
Special
Considerations
If the timer is disabled, (set to ‘0’) the monitor can be locked-
out for any other user.