GE 68K System - RTC - Test CCU RTC

GE Energy Services
68K System Monitor
User's Guide
SWM0023 1.00 2 General
3-62
Full Release
RTC - Test CCU RTC
Platform
o
CPM
o
D20
D20 Base
o
D20 ME
D20 Base
o
D20/200
CCU Base
o
D20/200 ME
CCU Base
o
D25
Description
Use this command to test the RTC synchronization between nodes in a D200.
Syntax
Below is usage and syntax information for this command
Command Format
rtc [/r]
Variables
/r = reset back to initial settings
Parameters
None
Example
At the monitor prompt, type rtc /r and press ENTER.
Special
Considerations
None