GE 68K System - DIR - Directory

68K System Monitor
User's Guide
GE Energy Services
General SWM0023-1.00 -2
Full Release
3-25
DIR - Directory
Platform
o
CPM
o
D20
D20 Base
o
D20 ME
D20 Base
þ
D20/200
CCU Base
þ
D20/200 ME
CCU Base
þ
D25
Description
Use this command to display a directory of the database tables residing in a specified
memory type. Database table information consists of:
name - table name
address - the absolute table memory address
records - the number of valid records in the table
record size - the size, in bytes of each record
Syntax
Below is usage and syntax information for this command
Command Format
D25: dir [/(n | p)]
CCU / CCUME: dir [/(l | g | e)]
Variables
/l = local NVRAM database tables (default)
/g = global NVRAM database tables
/e = EPROM/Flash default configuration database
tables
/n = D25 NVRAM
/p = D25 Flash
Parameters
None
Example
Type dir /n and press ENTER.
Results: The monitor displays the above information for all
NVRAM database tables.
At the end of every full screen, the monitor prompts
“--More--”, and will continue when any key is
pressed.
Continued on next page