GE Energy Services
68K System Monitor
User's Guide
SWM0023 1.00 2 General
3-72
Full Release
SP - Suspend Process
Platform
þ
CPM
þ
D20
D20 Base
þ
D20 ME
D20 Base
þ
D20/200
CCU Base
þ
D20/200 ME
CCU Base
þ
D25
Description
Use this command to stop all unprotected processes, some unprotected processes, or
a specific unprotected process.
Use this command to stop all processes before CPU-intensive operations, for
example, an NVRAM download.
Protected processes must remain running at all times. Protected processes include:
• MON monitor input process
• MOUT monitor output process
• WDOG watchdog process
• ROOT root process
• IDLE pSOS idle process
• LGIN boot login process (in some cases)
• iSCS processes, including B100 and file managers.
Syntax
Below is usage and syntax information for this command
Command Format
CPM / D20 / D25: sp [(pid | name)]
CCU / CCUME: sp [(pid | gpid | name)]
Variables
None
Parameters
(none) = suspend all unprotected processes.
pid = pSOS process ID (in hexadecimal); suspend a
specific process.
gpid = global pSOS process ID (in hexadecimal);
suspend a specific process.
name = case-sensitive process name. The monitor
supports the new process naming convention.
If you enter an entire name, a specific process is
suspended. If you enter the first few characters,
the command attempts pattern matching. All
matching processes are suspended.
Continued on next page
To Next Page
Loading...
