GE 68K System - PR - Profile

68K System Monitor
User's Guide
GE Energy Services
General SWM0023-1.00 -2
Full Release
3-47
PR - Profile
Platform
þ
CPM
þ
D20
D20 Base
þ
D20 ME
D20 Base
þ
D20/200
CCU Base
þ
D20/200 ME
CCU Base
þ
D25
Description
Use this command to display run-time statistics of all processes in the system,
including:
• the number of times the process was swapped in
• the number of system real-time clock ticks occurring during its run periods
• the average number of ticks (in tenths of a tick) per run (average)
• the CPU usage (in 10
ths
of percent) of the process
• the maximum period between watchdog process operations.
Note: Each clock tick is one millisecond.
Syntax
Below is usage and syntax information for this command
Command Format
CPM / D20M pr / (p | r)
CCU / CCUME / D25 pr / (p | r | t)
Variables
/p = print the process profile
/r = reset process profile counts
/t = print the process profile in the sequence of CPU
usage percentage
Parameters
None
Example
Type pr /r and press ENTER.
Results: The command resets the counts associated with
process profiling and watchdog run period.
The system displays any specified data and then
returns the prompt
Continued on next page