GE 68K System - UL - Upload

68K System Monitor
User's Guide
GE Energy Services
General SWM0023-1.00 -2
Full Release
3-81
UL - Upload
Platform
þ
CPM
þ
D20
D20 Base
þ
D20 ME
D20 Base
o
D20/200
CCU Base
þ
D20/200 ME
CCU Base
þ
D25
Description
Use this command to retrieve an S-record from the device’s memory.
Syntax
Below is usage and syntax information for this command
Command Format
CPM / D20: ul
CCU / CCU ME / D25: ul beg_addr end_addr [width]
Variables
None
Parameters
beg_addr = start of address range
end_addr = end of address range
Example
Type ul and press ENTER.
Results: uploads the contents of NVRAM to the terminal, and
returns to the prompt when completed.
Special
Considerations
None