GE Energy Services
68K System Monitor
User's Guide
SWM0023 1.00 2 General
3-20
Full Release
D - Dump Memory, Continued
Syntax (continued)
Example
Type d /w f024 and press ENTER.
Results: The system displays the specified data (eight lines
consisting of address, eight hexadecimal words, and
16 ASCII characters, starting at hexadecimal address
F024), then displays the prompt.
Type d and press ENTER.
Results: The system displays the next eight lines starting at
hexadecimal address F024+80=F0A4, then displays
the prompt.
Special
Considerations
• An attempt to display non-existent memory results in a bus
error.
• If this is the first dump, not specifying any parameters will
return an error.
To Next Page
Loading...
