GE AKTA GO - Connect the System

4.2.1 Connect the system
Introduction
The following connections must be made:
•
Power supply to the ÄKTA go instrument and the computer
•
Network connection between the computer and the ÄKTA go instrument
WARNING
Access to power plug. Do not block access to the power outlet
and power plug. The power cord with plug must always be easy
to disconnect.
WARNING
Protective ground. The product must always be connected to a
grounded power outlet.
WARNING
Power cord. Only use power cords with approved plugs delivered
or approved by GE Healthcare.
WARNING
Supply voltage. Before connecting the power cord, make sure that
the supply voltage at the wall outlet corresponds to the marking
on the instrument.
ÄKTA go Operating Instructions 29360951 AC 43
4 Installation
4.2 Hardware installation
4.2.1 Connect the system