4.1.4 Power requirements
Introduction
This section describes the power supply requirements for ÄKTA go.
Electrical power requirements
WARNING
Protective ground. The product must always be connected to a
grounded power outlet.
WARNING
Power cord. Only use power cords with approved plugs delivered
or approved by GE Healthcare.
The following table specifies the power requirements for the ÄKTA go instrument. For
power requirements for the computer, refer to the manufacturer's specifications.
RequirementParameter
100 to 240 V~Supply voltage
50/60 HzFrequency
Overvoltage category IITransient overvoltages
300 VAMax power consumption
ÄKTA go Operating Instructions 29360951 AC 39
4 Installation
4.1 Site preparation
4.1.4 Power requirements