4.3 Software installation
Introduction
This section gives an overview of how to install UNICORN and adapt the software to your
instrument. For more information, see the UNICORN Quick Installation Guide.
The software should be installed by someone assigned to be a UNICORN system admin-
istrator at the site. Detailed information about software installation and configuration
is available in the UNICORN Administration and Technical Manual.
In this section
This section contains the following subsections:
See pageSection
534.3.1 Download and Install UNICORN
544.3.2 Download the Instrument Configuration
554.3.3 Adapt UNICORN to your system
52 ÄKTA go Operating Instructions 29360951 AC
4 Installation
4.3 Software installation