GE ApexPro

9-2 ApexPro™ 2001989-200E
Printing
Print devices
You can print real-time and stored parameter data to the following Unity Network
print devices:
 PRN 50-M digital writer
 Laser printer
Print output
You can print displayed real-time or stored parameter data from a CIC Pro center or
from other GE patient monitors that are connected to the Unity Network.
The type of parameter data available to print depends on the source of the patient data
(e.g., hardwired bed, Combo bed, or telemetry bed) and from where you choose to
initiate the printing of this information (e.g., CIC Pro center or patient monitor).
Telemetry bed parameter data
The following table identifies the telemetry bed parameter data available to print from
a CIC Pro center or GE patient monitor.
Graph location
The Graph Setup for an individual patient determines where the data prints out
(graph location). Other operating conditions may exist that affect the graph location.
Telemetry bed parameter data
Data printed from a CIC
Pro center
Data printed from a
monitor
Parameter data Writer Printer Writer Printer
Vital Signs Yes Yes Yes Yes
Graphic Trends Yes Yes Yes Yes
Alarm history Yes Yes Yes Yes
Events directory Yes Yes Yes Yes
Alarm control Yes Yes Yes Yes
View patient Yes Yes Yes Yes
Alarm graph Yes Yes Yes Yes
Full disclosure strip -- Yes -- --
Full disclosure report -- Yes -- --
Calipers -- Yes -- --