GE ApexPro

System setup
2001989-200E ApexPro™ 4-17
364B
Control settings (temporary)
Control settings allow you to make temporary adjustments to some of the system and
clinical application settings of the CIC Pro center. Control settings are temporary,
meaning they apply to a selected patient and are erased when the patient is
discharged. However, alarm volume changes apply to the CIC Pro center and cannot
be changed on an individual patient basis.
Option Function
Admitted Telemetry
Patients
Provide a view-only overview of the admitted telemetry
patients.
NOTE
Each row contains information for one telemetry
patient. The second line of an entry shows the current
software level for the patient bed in question.
 Tower: The telemetry server system for this patient
 Receiver: The receiver slot assigned to this patient.
 Unit|Bed: The unit and bed assigned to this patient.
 Type: The type of patient; Tele Bed or Tele Combo.
 Transmitter: The transmitter’s identification number.
Telemetry Beds Add, modify or delete a telemetry bed name (in service
mode only).
Hardwire Beds Add, modify or delete a hardwire bed name (in service mode
only).
Transmitters Add, modify or delete a transmitter (in service mode only).