GE ApexPro

Equipment overview
2001989-200E ApexPro™ 2-5
Dinamap PRO monitors
NOTE
The Dinamap PRO monitors’ alarm limits are not configurable at the CIC Pro
center, but they can be silenced at the CIC Pro center. However, alarms that are
silenced at the CIC Pro center will not be silenced at the monitor. Refer to the
Dinamap Pro 100–400 Operation Manual for detailed information.
A Dinamap PRO 100, 200, 300, and 400 monitor can be connected to a transmitter in
order to monitor SpO2, NBP, and temperature and send the data for display at the CIC
Pro center. For setup information, refer to Dinamap PRO monitors on page 3-9.