3-10 ApexPro™ 2001989-200E
Equipment setup
425A
Interconnection cables
The interconnection cables used to connect the transmitter with the Apex oximeter
and/or the blood pressure monitor are not the same as those used with the Apex S
transmitter (CD Telemetry-LAN monitoring system). The connector ends that are
plugged into the transmitters are different and are not interchangeable.
423A
Accutracker DX
The blood pressure monitor allows telemetry monitoring of a patient’s NBP data. The
blood pressure cuff is connected to the blood pressure monitor, which measures and
displays systolic and diastolic blood pressures using the auscultatory method. Digital
values are also displayed at the CIC Pro center, and stored in Graphic Trends and
Vital Signs.
ApexPro system interconnection
cable connector
CD Telemetry-LAN monitoring system
interconnection cable connector
To Next Page
Loading...
