GE ApexPro

System setup
2001989-200E ApexPro™ 4-7
Unless you are using the password protected CIC Pro center service mode, the
service-level defaults appear in light, dimmed text. For more information, refer to the
appropriate CIC Pro center service manual.
User-level defaults (persistent)
In user mode, all of the controls except alarm volume are view-only. You must be in
the Service mode to set defaults. For more information, refer to the appropriate CIC
Pro center service manual.
Telemetry unit defaults
This option sets telemetry unit default settings. You must be in the Service mode to
set the Telemetry Unit Defaults at the CIC Pro center.
To view the telemetry unit default settings, click CIC Setup > Telemetry Unit
Defaults.
502A