3300/25 Dual Accelerometer Input Monitor Operation Manual
86
20. Appendix C–Filter Board Options
PWA 148921-01
20.1 Identify Filter Board
The configuration of the low pass filter is depends upon which filter board is being used.
The filter board can be identified by looking at the PWA (Printed Wiring Assembly)
number that is silkscreened on the component side of the board.
The three possibilities are:
PWA 79562-01 Refer to Appendix B
PWA 105521-01 Refer to Appendix B
PWA 148921-01 Refer to Appendix C
To Next Page
Loading...
