GE Bently Nevada 3300/25 - Filter Board Options

3300/25 Dual Accelerometer Input Monitor Operation Manual
90
20.5 Filter Board Options
Choose the filter type by installing and removing the jumpers on the filter board as
shown in the table below. See Section 20.2 for the location of the jumpers on the Filter
Board.
CHANNEL A CHANNEL B
FILTER TYPE
INSTALL REMOVE INSTALL REMOVE
High Pass (HP)
Filter ONLY
W27,76 W26,65 W20,59 W21,58
Low Pass (LP)
Filter ONLY
W26,65
W27,76 W21,58 W20,59
Band Pass (BP)
Filter
W27,65 W26,76 W20,58 W21,59
High Pass Filter before
Integrator/Gain Stage and
Low Pass Filter after the
Integrator/Gain Stage
W65,78
W83,84
W26,27
W37,76
W79
W58,60
W85,86
W20,21
W41,59
W61
*NO
Filters
W26,27
W37,65,76
W78,79
W83,84
W20,21
W41,58,59
W60,61
W85,86
* Denotes standard configuration.