GE CAM-14 - Disassembling the Acquisition Module

Troubleshooting
DisassemblingtheAcquisitionModule
1.RemovethefourTorxscrews(1)holdingthetopandbottomofthedevice
togetherusinga#6Torxdriver.
2.Liftthetopcover(2)highenoughtoallowaccesstotheswitchexcable(3)from
theswitchassembly.
3.Toavoiddamagetotheexcable(3),gentlyprythecableofftheswitchatthe
mainPCBconnector(4)withasmallscrewdriverbeforeremovingthecover.
NOTE:
Damagetotheswitchexcableconnectorwillresultinfailureofoneor
moreoftheswitchfunctions.
•DONOTattempttodisconnecttheswitchexcablebypullingonit.
•DONOTletthemainPCBhangbythecable.
4.WhenthemainPCBhasbeenseparatedfromtheswitchexcable,disconnect
thehostcableinterfaceex(5)fromthemainPCBbygentlypryingthe
connectorsapart.
26
CAM-14
®
/CAM-HD
®
2049751-001C