GE CARESCAPE B850 - Device information

Troubleshooting
131
2106778-001
11.2.2 Device information
The Device Information module shows the hardware and software information of the patient
monitor and the connected peripheral devices.
To view Device information:
1. Log in to the Webmin.
2. Select the Information tab.
3. Select Device Information.
Unit and Bed Name
• Unit name and Bed name for CARESCAPE Network.
Acquisition Information
E-module
• STP/TP/ST configuration information and P/PT/PP
configuration information from E- modules.
S/5 Printers
•Printer name.
IX Printers
• Printer name, hostname or IP address.
Printer Location
Information
• Printout type (Alarm Waveforms, Numeric Trends,
Reports, and Waveforms) and Printer location.
Remote Service
• Proxy URL, Proxy port, Proxy username, Remote service
status, System ID, Serial number, Enterprises URL,
Enterprises tunnel URL, and Protocol.
Language
• Clinical user interface language.
National Requirement
• Setting for country specific alarms (None or France).
Network
• Active configuration information, including MAC address,
MC Network type (IP address, Netmask, Gateway,
Destination IP address, Destination netmask, and PHY
configuration), and IX Network type (IP address, Netmask,
Gateway, DNS server 1, DNS server 2, and PHY
configuration).
ADT settings
• Visit Number Query status, IX IP address of ADT server.
Power Line Frequency
• Current power line frequency setting in use.
MUSE/12SL
• Location ID, Site number, MUSE web username, and MUSE
web URL.
Configuration information