CARESCAPE Monitor B850
46
2106778-001
4.6 Webmin information modules
The Webmin information modules provide useful information about the patient monitor setup
especially for troubleshooting.
The Configuration Information module shows the current platform configuration of the patient
monitor and the connected peripheral devices.
The Device Information module shows the hardware and software information of the patient
monitor and the connected peripheral devices.
Restart to shutdown and restart the patient monitor
automatically via Webmin.
NOTE: The patient must be discharged in order to enable
monitor restart via Webmin.
Settings to transfer platform and/or clinical settings from one
patient monitor to another, to take backup copies of the
settings to an external device and to restore the settings
from an external device.
Software Management to update patient monitor and parameter module
software.
Time to set the date and time settings.
Unit and bed name to configure the care unit name and bed name for
patient monitors that are configured to connect to the
MC Network.
Webmin module Use the module
To Next Page
Loading...
