Display D19KT VER01
C - 1 (4)
2106778-001
APPENDIX C: Display D19KT VER01
C.1 Disassembly and reassembly procedures
Before you start, read the following general guidelines and make sure to follow them:
12.1. Disassembly guidelines
12.1.1. ESD precautions
12.1.2. Reassembly precautions
12.1.4. Before disassembly
Detaching the Trim Knob, OSD Knob and/or Alarm Light Cover
WARNING PATIENT MONITORING INTERRUPTION — Make sure a patient is not being
monitored.
1. Turn the display power off at the rear power switch and disconnect all cables (USB,
display and AC power).
2. Place the display as shown below to prevent damage to the main
TRIM KNOB.
3. Remove the OSD
KNOB by gently pulling the OSD KNOB.
To Next Page
Loading...
