GE CARESCAPE B850 - Unit disassembly; Opening the enclosure cover

Disassembly and reassembly
155
2106778-001
3. Disconnect all external cables connected to the CPU unit.
4. Disconnect the power cord first from the wall outlet and then from the CPU unit.
5. Detach the CPU unit from the mount if installed.
Disassembly workflow
Use this workflow diagram to identify the simplest way to replace the FRU parts of the CPU C1.
Numbers in the diagram refer to the related step by step instructions in the Disassembly
chapter.
Follow the arrows from the top down to the required part and disassemble the monitor by
following the steps in between.
12.2.1
12.2.2
12.2.3
12.2.5
12.2.4
12.2.7
12.2.6
12.2.8
12.2.9