GE Concord 4 Installation Manual

Chapter 3: Programming
Concord 4 Installation Manual 33
Figure 27: Programming touchpad
Programming touchpad
Programming touchpad
connector
Programming touchpad cable (60-791)
In program mode, touchpad buttons let you navigate to all installer programming
menus for configuring the system. Table 8 below describes the touchpad button
functions in program mode.
Table 8: Touchpad programming functions
Button Programming function
# Select menu item or data entry.
* Deselect menu item or cancel data entry (if pressed before #).
A (c)
B (d)
Scroll through available options at the current menu tier. Also, scroll
through sensor text options during sensor text programming.
C Enter pauses when programming phone numbers.
D Delete certain programmed settings.
0 to 9 Enter numeric values wherever needed.
1 and 2 Select off (1) or on (2) wherever needed.
1 to 6 Press and hold to enter alphabetical characters A through F for account
numbers
7 and 9 Press and hold to enter * (7) or # (9) for phone numbers.

GE Concord 4 Specifications

General

Zones	96
Partitions	6
User Codes	230
Power Supply	16.5 VAC, 40 VA
Wireless Compatibility	Compatible with GE wireless sensors
Keypads	Up to 8
Outputs	2 onboard, expandable
Event Log	512 events
Backup Battery	12VDC, 7AH
Communication	Phone line, optional cellular or IP