Preface
xiv DM5E Operating Manual
Defects/Errors and Exceptional Stresses
If you have reason to believe that safe operation of your DM5E is no longer possible, you must disconnect the instrument and secure it
against unintentional reconnection. Remove the batteries if necessary.
Safe operation is no longer possible if conditions such as the following exist:
• The instrument shows visible damages
• The instrument no longer operates perfectly
• The instrument has been subjected to prolonged storage under adverse conditions such as exceptional temperatures and/or especially
high air humidity, or corrosive environmental conditions
• The instrument has been subjected to heavy stresses during transportation
Service
Every effort has been made to provide you with a reliable product. However, should service become necessary, GE Sensing & Inspection
Technologies, has established a number of Factory Trained Service Centers. For the location of the nearest facility, see the back cover of
this manual.
To Next Page
Loading...
