Chapter 2. Understanding the Keypad, Menu System & Displays
16 DM5E Operating Manual
2.3 Working with the Configuration Display (cont.)
• TIME - Used to set the current time (see Section 3.2 on page 21).
• DATE - Used to set the current date (see Section 3.2 on page 21).
• GAIN - Used to select a different level of gain (LOW/HIGH/AUTO/DEFAULT) (see Section 3.2.1 on page 23).
• RADIX - Selects a period (.) or comma (,) to be used as a decimal point (see Section 3.2 on page 21).
• AUTO POWER DOWN - When set to ON, this control conserves battery life by powering the instrument OFF if no key presses or
measurements occur for the set number of minutes. When set to OFF, the instrument is only powered OFF when is pressed and
held.
To Next Page
Loading...
