GE Druck ADTS 2 Series User Manual

Druck ADTS 2XX User Manual x
K0451 Issue No. 1
Pressure Units and Conversion Factors
T
ABLE OF PRESSURE UNITS AND CONVERSION FACTORS
Unit Conversion
To convert FROM pressure VALUE 1 in pressure UNITS 1
TO pressure VALUE 2 in pressure UNITS 2, calculate as follows:
VALUE 2 = VALUE 1 x FACTOR 1
FACTOR 2
Note:
T he conversion factor for pressure units referenced [1] are calculated for a water temperature of 4°C. Pressure
units referenced [2] are calculated for a water temperature of 68°F these units are normally used in the USA.
Pressure unit Factor (Pascals) Pressure unit Factor (Pascals)
bar 100000
lbf/ft
2
47.8803
lbf/in
2
(psi)
6894.76 inHg 3386.39
mH
2
O 9806.65 inH
2
O [1] 249.089
mbar 100 ftH
2
O [1] 2989.07
kgf/cm
2
98066.5 atm 101325.0
kgf/m
2
9.80665
pdl/ft
2
1.48816
mmHg 133.322
dyn/cm
2
0.1
cmHg 1333.22 hbar 10000000
mHg 133322.0
tonf/ft
2
(UK)
107252.0
mm/H
2
O [1] 9.80665
tonf/in
2
(UK)
15444300
cm/H
2
O [1] 98.0665 inH
2
O (USA) [2] 248.64135
N/m
2
1ftH
2
O (USA) [2] 2983.6983
hPa 100
kp/mm
2
9806650
kPa 1000
kp/cm
2
98066.5
MPa 1000000
kp/m
2
9.80665
torr 133.322

GE Druck ADTS 2 Series Specifications

General

Brand	GE
Model	Druck ADTS 2 Series
Category	Test Equipment
Language	English