i Druck ADTS 2XX User Manual
K0451 Issue No. 1
Introduction
•
This technical manual provides operating instructions for the Air Data Test System compatible with the
requirements of first line operation.
Scope
•
This technical manual contains the description, identification data and operating procedures
f
or the user of this equipment.
Safety
•
The manufacturer has designed this equipment to be safe when operated using the procedures detailed
in this manual. Do not use this equipment for any other purpose than that stated.
• This publication contains operating and safety instructions that must be followed to ensure safe
operation and to maintain the equipment in a safe condition. The safety instructions are either warnings
or cautions issued to protect the user and the equipment from injury or damage.
Use qualified* technicians and good engineering practice for all procedures in this publication.
Pressure
•
Do not apply pressure greater than the maximum safe working pressure to the equipment.
Toxic Materials
•
There are no known toxic materials used in this equipment.
Maintenance
•
The equipment must be maintained using the manufacturer’s procedures and should be carried out by
authorized service agents or the manufacturer’s service departments.
Technical Advice
•
For technical advice contact the manufacturer or subsidiary.
* A qualified technician must have the necessary technical knowledge, documentation, special test
equipment and tools to carry out the required work on this equipment.
To Next Page
Loading...
Need help?
General
