Druck ADTS 2XX User Manual 4
K0451 Issue No. 1
Environment
• The following conditions apply for both shipping and storage:
• Store in a cool dry place.
• Temperature Range -20 to +70 °C (-4 to +158 °F)
• Altitude up to 15,000 feet (4,570 metres)
Should the tester become exposed to moisture or very high humidity, dry as soon as possible and
temporarily store in a dehumidified area. The ADTS 2XX Test Set has one-year re-certification
requirement.
Note: It is important that the customer be sure the tester is in compliance with the OEM re-certification.
2.3 Returned Goods Procedure
• Should the unit require calibration or become unserviceable it can be returned to the Druck Service
Department.
• Please contact our Service Department, either by 'phone, fax or E-mail, to obtain a Returned Goods
Authorization (RGA) number or (Return Material Authorization [RMA] in USA), providing the following
information:
Product (i.e. ADTS 2XX)
Serial number
Details of defect/work to be undertaken
Calibration traceability requirements
Operating conditions
SAFETY PRECAUTIONS
• You must also tell us if the product has been in contact with anything hazardous or toxic and, the
relevant COSHH (MSDS in USA) references and precautions to be taken when handling.
IMPORTANT NOTICE
Service or calibration by unauthorized sources will affect the warranty and may not guarantee
further performance.
To Next Page
Loading...
